Laboratory Glassware – High Lab Africa Limited: Laboratory Reagent | Consumables | Chemicals | Lab Equipment | Diagnostic Kits

Water Distillation unit

Wed, 22 Jan 2025 11:37:50 +0000

Abundant Out put.The still provides, 4 litres/hr of distilled water produced through a power input of 3KW by a chromium plated heater housed in a horizontal Glass Boiler
Distilled output is cool ensured by a high efficiency condenser.Temperature of distillate 25^oC – 40^oC tested for ambient room temperature of 30^oC.
All units carry Marking.

Distillate Quality

Ideal for general Laboratory use- capable of producing pyrogen free water.

Boro Glass Distilling Apparatus

Wed, 22 Jan 2025 09:12:06 +0000

Boro Glass Distilling Apparatus, with Friedrichs Condenser, Interchangeable Joint & Stopper

Glass Dropper

Tue, 21 Jan 2025 14:04:04 +0000

Assembly Dropper Set (7)
Glass Dropper Tips (7)
BBT (Bent Ball Tip) Assembly Dropper Set
BBT (Bent Ball Tip) Glass Dropper Tips
BT (Ball Tip) Assembly Dropper Set
BT (Ball Tip) Glass Dropper Tips
BT (Blunt Tip) Assembly Dropper Set
BT (Blunt Tip) Glass Dropper Tips
LP (Long Press Bent Tip) Assembly Dropper Set
LP (Long Press Bent Tip) Glass Dropper Tips
LPPT (Long Press Pencil Tip) Assembly Dropper Set

2ml HPLC Vial Cap, PTFE

Fri, 17 Jan 2025 13:32:23 +0000

Screw/PTFE

Burettes

Fri, 17 Jan 2025 13:25:48 +0000

A burette is a long graduated glass tube with a stopcock at its lower end and a capillary tube which is tapered at the outlet of the stopcock. It used to transfer desired volumes of a liquid from one vessel to another. These are generally used in titrations. It is also known as Burette.

Pipette tips

Fri, 10 Jan 2025 13:55:30 +0000

Pipette tips are essential when using a micropipette. These get attached to the shaft of the pipette and are usually ejected after use. It is an essential lab item for any test or experiment. They are available as racked or loose bulk tips, with or without a filter, sterile or non-sterile.

Used in Institutes, Pharmaceutical, Industrial, Microbiology, Plasmid Purification, Chemistry, Biology, Medical, Laboratory, Research, Liquid Handling Task

Eppendorf tubes

Fri, 10 Jan 2025 13:44:23 +0000

This 1.5mL Eppendorf Safe-Lock tube has a patented hinged lid that eliminates any danger of leaks, ensuring absolute safety when working with expensive or toxic samples, radioactive substances, or DNA. The hinged lid features a small hook that clips around the rim of the test tube to prevent the tube from opening accidentally (e.g. during temperature control processes), though it can be easily opened using just one hand. The tube can be used in a temperature range from -80 degrees C to +100 degrees C (tube lid is more likely to pop open at temperatures greater than 95 degrees C), and can be autoclaved when open at 121 degrees C for 20 minutes to sterilize. The tube also has volume graduations and frosted labeling surfaces.

Graduated Pipette (Serological), CLASS-B, ASTM

Fri, 10 Jan 2025 10:14:45 +0000

micro pipettes are used to measure and deliver accurate volumes of liquid. The difference between the two is that micropipettes measure a much smaller volume, starting at 1 microliter, while pipettes generally start at 1 milliliter. These come in several designs for various purposes with different levels of accuracy and precision. One must be careful to have the right technique when manually dispensing liquid. Pipettes can be filled by hand using a bulb that is squeezed and then released to suck liquid to the desired volume as the user watches and stops at the correct measurement. It can be filled using an air-driven system that creates a vacuum to bring in an exact amount of a liquid that has been chosen and preset by the user. These instruments can have one or several tips that all measure at the same time. Pipettes and micropipettes are used in various laboratories, including, microbiology, environmental science, academic, research and medical laboratories. Micropipettes are frequently used in inspection and analysis processes at food and pharmaceutical companies. Regardless of the type of pipette, care and attention is needed. Irrespective of what make or brand a pipette is, all manufacturers recommend checking the calibrate plus minus every 6 months if it used on a regular basis. In the pharmaceutical and food industry companies are required to calibrate their pipettes every 3 months. To prevent damage hold them at a distance from the bottom of the container before drawing liquid. These instruments require cleaning after every use to prevent contamination from any previous contents. Always remember to remove the tip before storing. To avoid breakage, make sure pipette is placed vertically on the special holder called a pipette stand. These very delegate instruments require to be handled with care and caution. Therefore, make sure they are always stored correctly.

Laboratory Glassware – High Lab Africa Limited: Laboratory Reagent | Consumables | Chemicals | Lab Equipment | Diagnostic Kits

Water Distillation unit

Boro Glass Distilling Apparatus

Boro Glass Distilling Apparatus, with Friedrichs Condenser, Interchangeable Joint & Stopper

Glass Dropper

Assembly Dropper Set (7)

Glass Dropper Tips (7)

BBT (Bent Ball Tip) Assembly Dropper Set

BBT (Bent Ball Tip) Glass Dropper Tips

BT (Ball Tip) Assembly Dropper Set

BT (Ball Tip) Glass Dropper Tips

BT (Blunt Tip) Assembly Dropper Set

BT (Blunt Tip) Glass Dropper Tips

LP (Long Press Bent Tip) Assembly Dropper Set

LP (Long Press Bent Tip) Glass Dropper Tips

LPPT (Long Press Pencil Tip) Assembly Dropper Set

2ml HPLC Vial Cap, PTFE

Burettes

Pipette tips

Eppendorf tubes

Graduated Pipette (Serological), CLASS-B, ASTM